KREISEL GMBH & CO. KG

Successful commissioning of a ceramic ­rotary feeder at PPC Hercules

This article reports on the advantages of the ZSV-H Kreisel ceramic rotary feeder over screw pumps and on the successful commissioning of a ZSV-H for PPC Hercules in South Africa.

1 Introduction

The transport of fine bulk solids, such as cement, raw meal, fly ash or coal, usually takes place pneumatically over complicated conveying line routes. This means that the bulk material is transported by conveying air through a pipeline system. The friction that occurs between the bulk material and the pipeline wall and the vertical lift in the bulk material conveying lines causes a loss of pressure in the conveying air. Consequently, the conveying air for the product transport must be made available at a plant-specific pressure. The bulk material has to be fed into the air flow...

Related articles:

Issue 3/2017 KREISEL GMBH & CO. KG

Müllerkalk opts for pneumatic conveyance with ceramic rotary valves

The operators of the Müllerkalk and Wotan cement plants have decided in favour of four pneumatic conveying systems by bulk handling equipment manufacturer Kreisel. This article describes the project from its first planning phase through its final implementation. ...

more
Issue 3/2020 BEUMER GROUP GMBH & CO. KG

Beumer Group develops screw weigh feeders for precise and controlled feeding of alternative fuels

To reduce the use of expensive primary fuels like coal and oil in energy-intensive cement production, operators focus increasingly on alternative fuels and raw materials. Beumer Group offers ...

more
Issue 01/2013

Rotary valves for a variety of applications

Rotary valves have always been used for discharging and volumetric feeding powdery or granular materials from silos, hoppers, filters or cyclones....

more